Delmhorst TotalCheck Moisture Meter Flooring Package
The Delmhorst TotalCheck Flooring Package, includes the TotalCheck 3-in-1 meter, RH/T-S2 Sensors, a carrying case, a 26-ES Hammer Electrode, (10) 496 Hammer Electrode pins, (10) CS-3 Sleeves, a RH/T-C1 Cable and a PC/Kit. This package is the perfect starter kit for measuring the concrete floors before installing the floors. With the sleeves and RH/T-S2 Sensor you are able to measure the humidity inside the concrete slab to determine if the concrete is dry enough to lay down your flooring.
Delmhorst Instrument Co. introduces a new meter for the restoration contractor, IAQ specialist, general contractor, and flooring installer. Total Check integrates both our pin and pin less technologies. Delmhorst's new Total Check is a three-in-one moisture meter that enables you to identify problem areas in all building materials by quickly scanning large areas. Use the pin-mode to locate the exact source of moisture. You can also measure humidity and temperature using the RH sensor.
High levels of ambient humidity can be warning sign at inspection jobs, and RH is also a major concern when installing a floor over a concrete sub-floor. To address this concern, the Delmhorst TotalCheck was designed to conform to the ASTM F2170 standard to determine RH in a concrete slab, using in-situ probes. With TotalCheck, you can feel confident that your concrete floors have dried adequately.
Features of the Delmhorst TotalCheck Moisture Meter:
Bright, clear digital display
5%-60% MC in Pin mode
Corrects for 69 individual wood species and temperature in Pin mode
0-100 Ref. Scale in Pin mode
0-300 Ref. Scale in Scan Mode
Temperature Range: -40°C - 124°C
RH range 0-100%
Dew Point Range: -40°C - 80°C
GPP Range: 0.1 - 3820 GPP
Store up to 1400 readings with date and time stamp